2013 Pursuit 365i

• Molded/acrylic access door with gasket, 316L stainless steel locking latch and screen
• Molded cabin entry steps with handrail and wood treads
• Molded cabin hull liner with custom wood floor accents, storage access, drainage, and sound-damping insulation
• Molded cabin deck liner with sound-damping insulation
• Recessed bonded tempered glass hull and deck windows with shades
• 12 Volt outlet
• 120 Volt outlet with GFI protection
• Three switch panel with overhead LED lights (9) and LED floor accent lights (4)
• Pursuit entertainment center with 26” LED smart TV, Apple TV, iCloud account, iPad, 12v stereo with internet radio, speakers (8 total, 4 in cockpit, 4 in cabin), subwoofer in cockpit, with Bluetooth remote
• Custom v-berth seating that converts into a queen-size island berth with storage below. Solid wood table with electric actuated table base.
• 240 Volt/60 cycle cabin air conditioner with reverse cycle heat 16000 BTU self-contained with raw water pump, bronze sea strainer, seacock, and bronze thru-hull fitting
• Gunnel storage cabinets with doors and latches
• Forward bulkhead treatment
• Starboard hanging locker with light
• Fwd bilge pump with automatic float switch
• Fwd deck hatch with screen and sunshade
• CO detector

• Corian® galley top with integral stainless steel trivets
• Stainless steel sink with cutting board cover, overboard drain, and chrome stalon thru-hull fitting
• Pressurized hot/cold mixing valve and faucet
• 120v outlet with GFI protection
• Two burners 240v glass cooktop
• 4.6 ft refrigerator/freezer
• Convection microwave
• Lower galley cabinet with drawers, dedicated cabinet storage, positive latches, and slide-out trash can.
• Upper galley cabinets with hinged doors and positive latches
• Galley fire extinguisher

• Full beam stateroom with hull light port and starboard with shades
• 1 1/4” privacy door with locking latch and door catches
• Full stand-up headroom
• 316L stainless steel opening port light with screen
• Pursuit custom 240/120v MDP switch panel for cabin interior circuits and lights
• Hinged storage cabinet with adjacent upholstered seat
• Hanging locker with light
• Convertible bed berth for 2 persons with separating innerspring mattress feature
• CO detector
• 12v outlet
• 120v outlet with GFI protection

• Fiberglass enclosed head compartment with Corian® countertop
• Designer sink with vanity mirror and grab rail
• Custom and 1 1/4” wood framed entrance door with custom latch
• Full-height storage cabinet with shelves
• Poly storage cabinet with shelves
• Toilet tissue holder
• Towel rack

• Molded fiberglass helm with instrumentation visor, molded footrest, and folding floor
• Starboard aft tilting with safety lanyard
• Teleflex tilt sport helm
• Custom comfort grip steering wheel
• 12 Volt switch panel
• Independent windshield wiper washer control
• Compass
• Trim tab control panel and indicator
• 12 Volt outlet
• Helm fire extinguisher

• Joystick Control
• Twin Ray Marine 12’ Hybridtouch Multi-Function Display Units
• Garmin VHF
• Ray Marine Radar
• Ray Marine Auto Pilot
• Satellite TV
• FLIR Night Vision

• Molded fiberglass hardtop with opening sunroof
• 316L stainless steel hardtop supports
• Single-piece, laminated, bonded windshield system
• Folding stainless steel all-around navigation light with flag burgee
• Six tricolor LED lights
• Aft LED spreader light
• 60 mil Stratoglass side curtains

• 240v/60 cycle 8.0 kw Panda diesel generator with sound shield
• EPA-compliant lined 24-gallon fuel tank with engine pickups, shutoff valves, and digital level indicator
• Custom-built fuel lines with mechanically crimped fittings

• Single EPA-compliant 300-gallon, dual fill (P&S) fuel tank with engine pickups, shutoff valves, and digital level indicator
• Custom-built fuel lines with mechanically crimped fittings
• Two Yamaha® water separating fuel filters with primer bulbs

• 75-gallon water tank with level indicator
• Custom-built reinforced color-coded water hose
• Fresh water distribution manifold with dedicated valves for each service line
• Pressure sensing pump
• 11-gallon 240v stainless steel water heater
• Dockside fresh water inlet with pressure regulator

Hull, Deck, and Cockpit

• Hand-laminated hull with vinyl ester resin and engineered fabrics
• Infused fiberglass structural grid system with molded finish and integrated bilge water management system
• 5-ply resin-infused composite transom system with patented transom reinforcement grid
• Trim tabs with indicator lights and auto-retract
• Bronze thru hull fittings below water line
• Chrome over bronze thru-hull fittings below 7-degree heel line
• Stalon thru-hull fittings above the 7-degree heel line
• Bronze garboard drain
• Dedicated transducer location is not recessed in the hull
• Full-length bonded hull windows (6)
• High-density PVC rub rail with solid 316L stainless steel insert
• 5/8” 316L stainless steel bow eye
• Bow thruster 5.4 gp with group 31 AGM battery will charge off third leg of 40 amp charger
• Molded one-piece deck and cockpit liner with non-skid pattern area and overboard drains
• Hull and deck joint mechanically fastened with aluminum backing plates and thru bolts at cleat locations
• 10” pop-up cleats (4) on stern and 10” Hershoff spring and bow cleats (4)
• Molded recessed hatches with gaskets and 316L stainless steel latches and overboard drain tracks
• Flush-mounted integral anchor locker with fiberglass lid
• Horizontal anchor windlass with switch at helm and remote
• 316L stainless steel delta plow style anchor, twist shackle, chain, and 250’ of 5/8” rode
• 316L stainless steel through stem anchor roller with 8” mooring cleat, chain binder, and aluminum backing plates
• Fresh and raw water wash down in anchor locker with quick connect fittings
• 1 1/4” welded 316L stainless steel bow rail with 1’ stanchions and mid-rail
• Port and starboard 316L stainless steel 2-mile LED navigation lights
• 316L stainless steel deck plates for water, waste, and diesel; fuel chrome over bronze
• Telescoping, platform-mounted four-step boarding ladder
• Full beam swim platform
• Molded lazarette storage box, fiberglass lid 316L stainless steel latch and shore power access, and 50 amp breaker
• Custom cockpit upholstery with dri-fast foam and mesh backing
• Molded port transom walkthrough and hinged acrylic transom door with 316L stainless steel latch and catch
• Port and starboard 316L stainless steel transom grab rails
• Molded port side lounger with backrest, footrest, drink holders, 316L stainless steel opening port light, and glove box.
• 12v MDP panel with acrylic door and latch
• Molded entertainment center with sink, faucet, electric grill, and hinged, fiberglass lids/ doors with magnetic latches.
• Single captain’s chair with foldable armrests, swivel, fore, aft, and vertical adjustment
• Fresh water wash with chrome over brass pull-out sprayer, HOT & COLD
• Fresh and raw water outlet in cockpit with quick connect fittings and 25’ hose
• LED cockpit lights with waterproof switch in cockpit at port side steps
• Custom molded wrap-around seating with insulated storage, 2.3 ft3 12v cockpit refrigerator
• Custom molded engine cover with stainless steel gas lift, latched/gasket port side entry door, and engine ignition lock out
• Custom molded cockpit table with teak accents and dedicated storage

• Twin 30” counter-rotating 5.4 L 350 hp four-stroke engines
• Stainless steel, three-blade Yamaha® Saltwater Series II SDS propellers
• Command link plus twin engine display
• Electronic twin-engine binnacle control
• Key switch panel with safety lanyard
• Push Button Start Panel
• Dual Teleflex hydraulic steering cylinders
• Power steering
• 316L stainless steel tie bar

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing.

X